NUMAEX · Paloma

Slim Shower Enclosures in Toughened Glass

PALOMA is NUMAEX's framed glass shower enclosure system — five configurations, 3.5 mm walled T6-6063 aluminium profiles, and a hydrophobic glass coating that keeps the surface clear between cleans.

5 min readUpdated September 2026Ahmedabad · ships across India
A floor-to-ceiling PALOMA L-Type shower enclosure with slim aluminium profiles in a matt finish, clear toughened glass, and a magnetic-close door — photographed
PALOMA L-Type. 3.5 mm walled T6-6063 aluminium, magnetic close, telescopic adjustment at the jamb.
Profile alloyT6-6063 aluminium
Wall thickness3.5 mm
Steam retention90–95 % in plumb conditions
Telescopic flat bar11 × 26 mm
What it is

A framed enclosure built around the wet-dry boundary

PALOMA's single job is to keep the wet area wet and the dry area dry. Every decision — panel position, door swing, curb slope — follows from reading those two zones first. The profiles are 3.5 mm walled T6-6063 aluminium: enough wall to hold the glass rigid at full height, not enough to read as heavy.

Doors hang on hinges or pivots at the box pipes. A telescopic flat bar, 11 × 26 mm, sits at the jamb and absorbs out-of-plumb walls and floors — the kind of tolerance that accumulates on every real site. Two silicone seals run the full height of the jamb. A magnetic catch closes the door without a handle pull. In ideal, plumb conditions the enclosure holds 90 to 95 percent of steam inside.

Close detail of a PALOMA door jamb showing the slim aluminium profile, telescopic flat bar and silicone seal line
PALOMA glass panel detail showing ceramic-print grid pattern and fluted surface at the door edge
The glass

Ceramic grids, fluted panels, hydrophobic coating

Grid patterns in PALOMA are ceramic paint embedded in the glass — no metal grids sit inside the enclosure, so soap and shampoo have no ledge to collect on. Water slides straight down. The grid reads as a designed surface; cleaning it is a single wipe.

Fluted glass is installed curves-outward, smooth face toward the shower. On a T-type layout the curves face the WC side. One rule holds across every configuration: no TACTILE glass inside a shower enclosure — fluted is specified, TACTILE is not. A hydrophobic coating across the outer face keeps the clear glass clear between uses.

Metal grids collect soap and dirt; ceramic paint embedded in the glass keeps the inside clean while giving the grid effect.Engineering note, PALOMA
Hardware and finish

Handles, finishes, and the bathroom it sits in

Handles come in a range of sizes, finishes and positions; any handle can double as a towel bar. PALOMA shares its hardware finishes with NUMA illuminated mirrors and TYDIS mirror cabinets, so the enclosure, the mirror and the cabinet can be specified from one material vocabulary rather than three separate catalogues.

Finishes run across matt, metallic and earthy wood tones. For full-height installations, exhaust cut-outs are taken in the glass on request. The door swings outward toward the dry area as standard — the international norm — though inward swing is available where the floor plan requires it.

Specifications

PALOMA system

ParameterDetail
Profile alloyT6-6063 aluminium
Profile wall thickness3.5 mm
Telescopic adjustment bar11 × 26 mm flat bar
Door sealsTwo silicone seals at the jamb, full height
Door closeMagnetic catch
Steam retention90–95 % in ideal, plumb conditions
Glass optionsClear, fluted, ceramic-print grid, hydrophobic-coated
Grid typeCeramic paint embedded in glass; Patch Grid (metal) available
Framed / framelessBoth available across all formats
Enclosure heightUp to 11 feet and above
Choosing

Five PALOMA configurations

180° InlineL-TypeC-Type
LayoutSingle straight run across the openingTwo panels at 90°, for a corner or wall returnGlass on three sides, for a niche or single-wall shower
Door positionOne door in line with one fixed panelDoor at the corner junctionDoor on the open face of the niche
Typical useAlcove or wall-to-wall openingCorner recess, the most common residential planShower set into a built niche
Framed / framelessBothBothBoth
Grid glassAvailableAvailableAvailable
In situ
PALOMA 180° Inline shower enclosure, full height, clear glass, slim aluminium profiles, photographed from the dry side of the bathroom
PALOMA 180° Inline. One fixed panel, one door, in a single straight run across a wall-to-wall alcove.
PALOMA L-Type corner enclosure with ceramic grid-pattern glass panels, shot at an angle showing both faces of the corner join
PALOMA L-Type with ceramic-print grid glass. The grid is embedded in the glass surface — no metal, no ledge for soap.
PALOMA C-Type three-sided enclosure with fluted glass, photographed inside a tiled niche, showing the smooth interior face of the fluted panels
PALOMA C-Type with fluted glass, curves facing outward. The smooth face turns toward the shower.
Questions we are asked

Before you specify

Which way should the PALOMA door open?
Outward, toward the dry area — that is the standard. Inward swing is available, but check for obstructions and the position of the shower head before specifying it.
Can TACTILE textured glass be used inside a PALOMA enclosure?
No. Fluted glass is available and installed curves-outward; TACTILE kiln-formed glass is not specified for shower enclosures.
How does the telescopic adjustment work?
An 11 × 26 mm flat bar at the jamb absorbs out-of-plumb walls and floors. No site is perfectly square; the telescopic bar takes up the tolerance without shimming or rework.
Do the PALOMA hardware finishes coordinate with NUMA mirrors and TYDIS cabinets?
Yes. PALOMA, NUMA and TYDIS share a hardware finish vocabulary, so the enclosure, the illuminated mirror and the mirror cabinet can all be specified from the same palette.
Begin the conversation

Every PALOMA is made to the project.

Configurations, glass, grid patterns and hardware finishes are specified to the bathroom plan — not selected from a fixed menu. Send the drawings or bring them to the Ahmedabad showroom.

Request a consultation
WhatsApp